Treiber für Pitney Bowes AddressRight DA30S, DA50S, DA70S und weitere

Laden Sie sich die Datei für Pitney Bowes OfficeRight DA-30/5x/7xs als ZIP herunter. Die Datei beinhaltet neben Treibern in gängigen Sprachen, Installationshinweise, FAQs Dateityp: ZIP Dateigröße: 79 MB Zugangsbeschränkung: freigeschaltet [ LADEN ... ]

Laden Sie sich die Anleitung für Pitney Bowes OfficeRight DA-30s/50s/55s als PDF herunter. Die Anleitung ist in deutscher Sprache. Dateityp: PDF Dateigröße: 3,9 MB Zugangsbeschränkung: freigeschaltet [ LADEN ... ]

How to access and use the LCD display menu

To access the menus:

1. Press On Line button. The LCD displays “OFF LINE” and the green light goes out.
2. For Main Menu, press Menu.
3. For Setup Menu, press and hold Menu for four seconds.

To navigate within the menus and change settings:

1. Press Eject - or Cartridge + to scroll through the menu options.
2. Press Enter to select the desired menu option or a sub-menu option.
3. Press Eject - or Cartridge + to scroll through the sub-menus within a menu option or the settings within a menu option. An asterisk (*) before the setting indicates that the setting is currently selected.
4. Press Enter to select a setting. An asterisk will appear before the setting indicating that it is selected.
5. Press the Menu button to move up a level in the menus.

To exit the menus:

1. Press the Menu button until the printer LCD displays “OFF LINE”.
2. Press On Line to enable the printer.

How to assign a static or dynamic (DHCP) IP address to AddressRight printers

To assign an IP address dynamically via DHCP

1. Place the printer in Offline mode.
2. Press and hold the Menu key for about 2-4 seconds to enter the Setup Menu.
3. Using the + or - keys to scroll, go to Communication > TCP/IP > DHCP, pressing the Enter key to select each.
4. Change Disable to Enable and press Enter > Menu.
5. Press Menu until you are back at the Ready screen.

To assign a static IP address

1. Contact your IT department to obtain an IP address for the AddressRight Printer, as well as the required Subnet Mask and Gateway for your network.
2. Place the printer in Offline mode.
3. Press and hold the Menu key for about 2-4 seconds to enter the Setup Menu.
4. Using the + or - keys to scroll, go to Communication > TCP/IP > DHCP, pressing the Enter key to select each.
5. Change Enable to Disable and press Enter > Menu.
6. Scroll down and select IP Address.
7. Use the + or - key to set each IP Address section, pressing Enter to confirm each setting.
8. Once the IP Address is set, press Enter > Menu.
9. Scroll down and select Subnet Mask.
10. Use the + or - key to set each Subnet Mask section, pressing Enter to confirm each setting.
11. Once the Subnet Mask is set, press Enter > Menu.
12. Scroll down and select Gateway Address.
13. Use the + or - key to set each Gateway Address section, pressing Enter to confirm each setting.
14. Once the Gateway Address is set, press Menu until you are back at the Ready screen.

Resolve Address Too High message on printer when processing a print job

Issue

When processing a print job, the message "Address Too High" is displayed on the printer.

Cause

The following can cause the "Address Too High" message to display:

• The envelope layout does not match the media being fed through the printer
• Film and/or dust has built up on the sensors
• The carriage return setting needs to be changed to fit the media size

Resolution

Follow these steps to resolve the "Address Too High" message:

1. Review the address layout:
   1. Check if the address is within 1/8'' from the top of the envelope/media.
   2. If the address is less than 1/8" from the top of envelope/media, move the address down.
2. Clear dust off of the sensors:
   1. Lift the transport door.
   2. Use compressed air to blow dust away from the sensors.
3. Change the Carriage Return setting on the printer:
   1. Press the Online button on the printer. The green light to the upper right of the Online button should turn off.
   2. Press and hold the Menu button for two seconds until Setup Menu appears on the screen.
   3. Using the "+" (up) and "-" (down) buttons, scroll down to Communication and select the Enterbutton.
   4. Using the "+" (up) and "-" (down) buttons, scroll down to Line Termination and select the Enterbutton.
   5. Using the "+" (up) and "-" (down) buttons, scroll down to CR=CR+LF;LF=CR+LF and select the Enter button. An asterisk should appear to the left of the option to confirm selection.
   6. Press and release the Menu button until the screen shows OFFLINE.
   7. Select the Online button. The green light to the upper right of the Online button should turn on.
   8. Turn the printer off and back on to clear any remaining jobs stuck in the printer queue.

Betroffene Produkte

Pitney Bowes AddressRight DA-30s   [ anschauen ... ]
Pitney Bowes AddressRight DA-50s   [ anschauen ... ]
Pitney Bowes AddressRight DA-55s   [ anschauen ... ]
Pitney Bowes AddressRight DA-70s   [ anschauen ... ]
Pitney Bowes AddressRight DA-75s   [ anschauen ... ]